GE stackable washer dryers are susceptible to various errors you can solve yourself without the assistance of a licensed technician. For instance, if the washer gets stuck on the spin cycle, you don’t have to disassemble the machine to resolve the issue. A simple reset will do.
Is There A Reset Button On GE Stackable Washer Dryer?
There is no reset button on a GE stackable washer dryer.
Check the manual for confirmation. Don’t waste time looking for a reset button when the manual clearly says your appliance doesn’t have one. Manufacturers do not include reset buttons in their washer dryer designs.
They don’t see the point. This is true for most household appliances. Have you looked at the devices in your kitchen and laundry room? None of them offer reset buttons. Haven’t you ever stopped to wonder why?
You have plenty of reset methods and procedures at your disposal. Even though a button would simplify the process of resetting washers and dryers, manufacturers do not see the point in including a reset button when you have other options.
How Do I Reset GE Stackable Washer Dryer?
Method 1:
- Turn the Dial to the ‘ON’ position
- Hold the ‘Start’ & ‘Deep Rinse’ Button for 3 seconds.
- Lights will start flashing and reset the computer.
You can check this video for more insight
Method 2
- Start by shutting the machine off. If it has a power button, use it to deactivate the appliance.
- Pull the plug out of the outlet. Wait 60 seconds before pushing the plug back into the outlet.
This procedure will eliminate simple glitches.
If your washer and dryer are hardwired, don’t fret. Disconnect the power using the breaker or fuse. Turn the power on after two minutes.
When Do I Need To Reset GE Stackable Washer Dryer?
GE Stackable Washer Dryer Not Heating
If the appliance doesn’t generate the heat you need, consider the following potential causes:
1). Blockage
Lint is a common problem among washers and dryers because clothes generate the substance all the time. Therefore, it shouldn’t surprise you to learn that the dryer’s vents are blocked.
In other words, the air cannot flow. Clear the vents. Identify the blockage and remove it. You should also wipe the surfaces around the vents. If the internal compartment has additional layers of lint, another blockage will form down the line.
If the heating problem persists even after unblocking the vents, consider other options.
2). Over Load
How many clothes did you add to the appliance? Most homeowners understand the consequences of overloading a washer. You can’t expect the machine to wash your clothes when the load is too large.
Dryers are the same. You can compromise the machine’s operations by overloading it. Either the appliance won’t dry the clothes, or it will take longer than usual. You may also notice unsettling sounds.
If you check the manual, it will tell you the capacity of the dryer. Don’t exceed this capacity.
3). Blown Thermal Fuse
Laypeople associate fuses with electricity. They don’t know what thermal fuses are, let alone what they do. A thermal fuse responds to overheating. A dryer with a blown thermal fuse cannot work.
If it works, the machine won’t dry your clothes. Check the thermal fuse for continuity. If it blows, get a new one.
GE Stackable Washer Dryer Not Spinning
A faulty lid switch assembly can also prevent spinning. Although, the most obvious culprit is the drive belt. If the drive belt wears out or breaks, the washer stopped spinning.
Other notable causes included faulty motor coupling and a burned-out control board. Most of these problems require technical support. You can’t solve them by resetting the device. But that shouldn’t stop you from trying.
For all you know, the washer stopped spinning because of a glitchy control board. You can solve glitches with a reset.
GE Stackable Washer Dryer Not Filling
You have a blocked water inlet valve, hence the restricted water flow. The water will either fill slowly or not at all. This assumes that you connected the faucets. Check the faucets before panicking. For all you know, the hose has a kink, and removing it will solve the problem.
Of course, things are rarely that simple. More often than not, you have to deal with faulty lids and water level switches.
GE Stackable Washer Dryer Not Draining
You can blame draining issues on the drain pump filter, lid switch, and drive belts.
It doesn’t occur to them to check the drain hose for kinks and twists. This is all it takes to prevent draining in a GE washer and dryer. If the hose is fine, look at the drain. Is it clogged?
GE Stackable Washer Dryer Not Drying
Is the appliance not drying, or is it taking too long to dry? Both problems have similar sources. For instance, do you have a reliable power source? Some homeowners connect 240V washers and dryers to 120V systems.
As a result, the dryer cannot execute its functions. Then again, you can’t rule out overloading. People make this mistake all the time. Be sure to check the vents. Clogging can create heating issues.
Other components you should check include the heating element assembly, thermostat, and control board.
GE Stackable Washer Dryer Won’t Start
You have a power problem. Check everything, not just the power cord, fuses, and breakers but the control board. Are you using an extension cord? Is the circuit large enough to accommodate the appliance?
Do you trust the wall outlet? If the washer dryer has a reputation for producing a humming sound, check and possibly replace the drive motor.
GE Stackable Washer Dryer Won’t Agitate
You have some damaged or defective components in the washer dryer, including the upper agitator, wash plate, lower agitator, drive motor, agitator assembly, door lock, etc. You have a lot of troubleshooting to do.
GE Stackable Washer Dryer Not Locking
The door lock is corroded or damaged. Either way, the best option is to replace it. You can confirm your suspicions by testing the door lock switch for continuity.
If the door lock is fine, check the control board. You can try resetting the machine. Some glitchy control boards will respond to resetting.
GE Stackable Washer Dryer Keeps Stopping
GE stackable washer dryer keeps stopping because of a bad power supply. Another problem, such as a blocked vent. If lint blocks the vent, preventing the air from circulating, the appliance will shut down because the temperature is too high.
These devices have thermal overload switches that respond to overheating. But blocked vents have a simple solution. The same cannot be said for a defective door lock.
It will cause the washer to stop in the middle of a cycle. A faulty door lock can prevent the machine from running in the first place. The main control board is even more challenging because you must open the appliance to reach it.
You can fix some control boards by resetting the washer. But others are damaged beyond repair. Your only option is to replace them.
Does Resetting Fix All These Issues? GE Stackable Washer Dryer Troubleshooting Tips
Resetting cannot solve every problem you encounter. You have to experiment with different solutions until you find one that works. For instance:
1). Make sure the faucets are connected and turned on fully. Washers require a specific pressure.
2). The machine cannot start a cycle until the lid is closed tightly. The appliance won’t run if it has a faulty door lock and switches assembly. But before you blame your problems on a defective assembly, identify and remove dirt and debris from the door gasket.
3). Don’t overload the internal compartment. If the machine won’t agitate, you can either reduce or redistribute the load.
4). Clean blockages, drains, and filters.
5). Some machines will stop in the middle of a cycle because they have a problem. But others will do so because of an automatic self-check system. Therefore, you shouldn’t panic.